Blow-Off Valve System for WRX STI CAR




BOV offers adjustable sound and quick response. Two chambered body using an assisting vacuum hose. This unit incorporates a revolutionary design in boost pressure release systems. Blow Off Valves System allow built up boost pressures to escape into the atmosphere when the engine is no longer under load. This prevents the pressure from backing up into the turbine compressor housing, causing it to rapidly stop, and causing potentially destructive damage to the turbo.

The BOV is also adjustable to allow desired amounts of boost response between shifts. Unlike conventional single chambered blow off valves, the Twin Chamber Blow Off Valve System uses two separate chambers with an assisting pressure hose. This design allows for a short and highly sensitive spring in the first chamber that controls a piston and a valve in the secondary chamber. The result: quicker valve response under low AND high boost pressures. The blow off valve also gives the user the ability to adjust the blow off sound.

By turning a disk near the base of the unit, the exhaust gas release volume can be adjusted to normal, loud, and extra loud.


BOV

Comments

Post a Comment

Popular posts from this blog

Exhaust For Subaru Impreza WRX STI 2003-2004 Car

Image
The HKS Carbon-Ti catback exhausts are exclusive Special Edition HKS Hi-Power catback exhaust systems . Also referred to as the HKS Carbon Titanium Hi-Power catback exhaust, these exclusive versions of the HKS Hi-Power catback exhaust consist of a carbon-fiber wrapped muffler shell, titanium tip, and polished SUS304 stainless steel piping for a stylish and aggressive look. Each HKS Carbon-Ti catback exhaust looks as good as it performs. Inspired by GT racing in Japan, HKS developed its Carbon-Ti catback exhaust system with features found on racing exhaust systems. The HKS Carbon-Ti catback exhaust series incorporates a race inspired offset muffler and piping design, eliminating unnecessary bends for the straightest exhaust path. This less restrictive design allows the HKS Carbon-Ti catback exhaust to have greater exhaust flow and less back-flow pressure, enhancing higher-PRM power gains. The HKS Carbon-Ti catback exhaust system can be used for both turbocharged and naturally aspirated
Read more

Subaru's Car Intake System Design

Image
Subaru's Car Intake System Design The following is an opinion on why different year model Subaru's react differently to modifications to their intake system . Primarily we're focusing on the late model Subarus which used either an air-flow system (up to 1999) or the speed-density system (2000+) in the North American market. Before we discuss the technical details of the Subaru Intake System, lets first get familiar with the two ways Subaru has used recently to measure air flow. The first method discussed is MAF Sensors which were used on all late models until the 2000 model year. From 2000-on Subaru has begun using a speed-density system which primarily relies on a MAP sensor. MAF Sensors Mass Air Flow (MAF) Sensor is used by the engine control unit (ECU) to determine the weight of the air going into the engine. To do this, Subaru uses a cylinder shaped sensor mounted securely to the stock air cleaner box behind the passenger side headlight assem
Read more